KP 21–27 Grouted Fixed Pedestal
The KP 21–27 is the entry-height pedestal in the grouted (jointed) KP series, providing a 0.83"–1.06" finished lift for raised paver assemblies where minimum clearance still needs drainage beneath the finished surface. Two-piece body with integrated joint spacer tabs sets consistent joint lines across the field, and the top plate supports porcelain, natural stone, and terrazzo pavers. Additional material, performance, and certification documentation is available subject to manufacturer verification.
- Height
- 0.83"–1.06"
- Adjustability
- Fixed
- Head Type
- Fixed
- Slope-correcting
- No
Original product spec: KP 21-27 Derzli Sabit Pedestal
Common Applications
| Context | Typical use |
|---|---|
| Pool decks | Level porcelain pavers above a sloped concrete or waterproofed pool surround where finished elevation is tight. |
| Balconies | Raised paver surface above a sloped balcony slab with drainage beneath the finished floor. |
| Shower decks | Low-clearance walkable surface above a waterproofing membrane with continuous drainage. |
| Low-profile patios | Residential and light-commercial patios where the finished elevation cannot exceed roughly 1 inch. |
Configuration & Specifications
- Finished height range: 0.83" – 1.06" (21–27 mm)
- Head type: Fixed (integrated joint spacer)
- Joint spacer options: 2, 3, 4, 5 mm (DX suffix)
- Substructure variant available: KP-Karkas for wood/aluminum joists
- Material and finish details are provided subject to manufacturer verification
- ISO 9001 and ISO 14001 are manufacturer-published quality-system references and are not product performance certifications
Additional material, performance, and certification documentation is available subject to manufacturer verification.
Installation Sequence
- 1Attach the nuts to the lower body.
- 2Turn the nuts in the direction of the arrow to lock them.
- 3Combine the upper body with the bottom assembly.
- 4Rotate the upper body if fine leveling is needed, then set the paver — the integrated joint tab controls spacing.
Site conditions vary — confirm the install sequence against your project drawings and manufacturer documentation.
Product recommendations, quantity estimates, and selector results shown here are preliminary guidance only. Final product selection, quantities, load requirements, and installation details require project-specific review of drawings, site conditions, and applicable codes. Florida Pedestal does not provide engineering certification or code approval.
